| Usage: | Ozone |
|---|---|
| Application Fields: | Chemical |
| Noise Level: | Low |
| Machine Size: | Small |
| Condition: | New |
| Certification: | ISO, CE |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Thermal-catalyst type ozone destructor
Work principle
Thermal-catalyst ozone destructor removes the tail ozone by catalytic decomposition.
This kind of ozone destructor is designed to be an integrated unit. The ozone destruct equipment (heater and catalyst tank), local control panel and fan are installed on one welded steel frame. The catalyst has been fulfilled according to requirements. The product has passed operation test and performance tested.
The main components of heat-catalyst ozone destructor are as follows:
1 Catalytic reaction tank which includes stainless steel catalytic tank, stainless steel meshed grill and supporting plate, catalyst, etc.
2 Heater which includes temperature controller, stainless steel shell, heat components, etc.
3 fan: aluminum turbine, single/ three-phase electric motor.
4. Demister which includes shell, frame, special mist elimination screen mesh, water discharge device, etc.
5 Control cabinet: Control cabinet includes one set of display regulation instrument and alarm could be installed at the termination for remote indication. The control cabinet of small size destructor is integrated with destructor. But control cabinet of large size is separated from destructor to make ozone destructor operate automatically. The cabinet is made of thin steel board and the protection class is IP45. The protection class also can be upgraded to IP55 based on user's requirements. The components are as follows:
a Special operation panel: local/remote switch, press button, indicating lamp, temperature control instrument, part or all of monitoring instrument system.
b Control system: It can be controlled remotely by PLC besides manual control on operation site.
Main features
1 Safe: used the best catalyst, ozone destructor will decompose ozone into safe concentration without consuming ozone and absorbing ozone.
2 Operating under low temperature: The operating temperature is about 40-60ºC to cut down the operating cost. It can save about 90% operation cost compared with heat type ozone destructor.
3 Low pressure drop: maximum pressure drop is only 0.02MPa.
Specification
|
Name |
ozone destructor |
|
Type |
DT-300F |
|
Type |
Thermal-catalyst ozone destructor |
|
Rated flow rate |
37Nm3/h |
|
Max. flow rate |
45Nm3/h |
|
Outlet ozone concentration |
0.1ppm in steady state,about 0.2mg/m3 |
|
Max. work pressure |
0.09MPa |
|
Gas inlet condition |
air or oxygen which contains ozone |
|
Rated inlet ozone concentration |
0.5wt%, about7 g/m3 |
|
Catalyst filling capacity |
37.5KG |
|
Rated power |
2.0kW |
|
Power supply |
220V/1ph/50Hz |
|
Interface |
gas inlet:DN40 gas outlet: DN32 |
|
Dimension |
1100*700*1310(mm) |
Packaging & Shipping
All of GUOLIN ozone products are packed by plywood case which meet the requirements of export without fumigation.
After-sales service mode
Customer service center set up 400 and 800 national service hotline for the user to answer the questions during the operation of equipment. We make service commitment of "fast response, rapid action" and provide customers with convenient after-sales service.
After-sales service team
Customer service center works based on the strategic policy of "taking the technology as guide, quality as main line and customer satisfaction as the purpose ". We devote ourselves to build a professional after-sales service team. At the same time, the customer service center has a professional after-sales service vehicles and service equipment to provide customers with professional after-sales service.
After-sales service work
Guolin After-sales Service Center could provide a comprehensive pre-sales, sales and after-sales service for customers to make sure the stable operation of all products. Guolin will supply the most advanced products, the most convenient operation and maintenance and best service for all industries.
Qingdao Guolin Technology Group Co., Ltd was established in 1994, which is a high-tech enterprise based on advanced ozone technology and is ranked as the leading ozone system suppliers in China. Guolin is engaged in ozone generation mechanism research, ozone equipment design and manufacture, ozone application project design, installation, debugging, operation and maintenance for water treatment project, waste water treatment project and flue gas denitrification project.
Guolin is the main editing unit of China Urban Construction Industry Standard-"Ozone Generator for Water Treatment"(CJ/T322-2010 )and undertake the project task of 12th Five-Year Plan "Special Water Item" ---"large ozone generator research, development and industrialization". Guolin is the first manufacturer in China which can produce ozone generator with 10kg/h, 50kg/h, 100kg/h and 120kg/h capacity. Thousands of sets of ozone systems have been widely used in water treatment, waste water treatment, flue gas denitrification and industrial oxidation, etc.
With more than 20 years of development, Qingdao Guolin Environmental Technology Co., Ltd. has become the globally known professional ozone equipment manufacturer and ozone system supplier all over the world.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}